Purpose:
Silica gel Roll forms are silica gel pouches of 0.5gram, 1gram and 2gram pouches which are automatically inserted by laser cutting machines inside the bottles along with the tablets. It is an automation process which could be done instead of manual insertion of the small pouches inside the bottle which consumes a lot of time and labor which is eventually affected by the per day output in a pharmaceutical unit.
Silica Gel Pouch TYVEK and NON-WOVEN
Characteristics
Includes fine-pored spherical silica gel and fine-pored granular form of silica gel, which are transparent or Milky white.
MM size: 3-4 MM for Beads and 9/16 Mesh in Crystals
Specific surface: 650-800m2/g,
Specific heat: 0.92KJ/kg. °C
Heat conductivity: 0.63KJ/m. Hr. °C
The gel is mainly used for desiccation and moisture absorption, and as a catalyst carrier, adsorbent, separating agent and pressure-swing absorber as well.
Technical Specification:
| Item | Typical Data | |||
| Absorptive capacity | RH=20%, % ≥ RH=50%, % ≥ RH=90%, % ≥ |
28.2
28.2 39.6 |
||
| Heat loss | % | ≤1.0 | ||
| pH Value | 5.5 | |||
| Specific resistance | Ω.cm | ≥5600 | ||
| Silicon dioxide content | % | ≥ 95.5 | ||
| Percent of pass of spherical particle | % | ≥90 | ||
| Granularity mm | 3-4 | |||
| Stacking density | g/L | 784 | ||